Indian Creek Designs BKO

I want to introduct something about Flex RGB ColorThe BKO was designed to use nitrogen gas or a
Light Bar. The elumina flex light bar ecm-t48vbcompressed air system. The company urged users to
ecm-t60m3vb, operated at dc24v, is a linear array ofavoid the use of CO2, although it was still possible to
topleds mounted on a pcb. With a total of 48/60use it as a propellant. The reason for this was that
topleds, its mechanical dimension is 610(l) x 7(w)mmCO2 is an industrial grade gas and may contain dirt
500(l) x 16(w)mm, and feature to be sheared intoand rust, which can in turn damage the marker. CO2
sections. The color is available in red, amber, blue,can be used with anti-siphon systems and filters.
green white, and rgb. The bending curve of the flexAdjustable regulator compressed air systems
light bar could be reach to 12" diameter. With theThe input pressure from the compressed air system
operation of elumina lighting controller (eaco-512ir orshould be regulated down to 350-500 PSI output
cm-124hd), it becomes much easier to get yourpressure.
desired lighting colors with significant operating costFixed output regulated compressed air systems
saving. It offers a lighting solution for retail, cove light,Fixed output regulated tanks (preset) will work just
architectural illumination, casino, pub, as well as manyfine with the BKO, however it will not perform as
lighting design applications. Flex RGB Color Light Bwell as an adjustable regulated tank. If your
The Indian Creek Designs (ICD) logocompressed air system does not have an output
Specificationspressure gauge on its regulator, it is not
Typerecommended for usage.
ElectropneumaticFiring rate
ActionSince the BKO was capable of reaching firing rates
Semi/Fully-Automaticover 15 BPS, it operates best when used with a
Barrelforce-fed hopper like: Vlocity, Halo, Empire B, or Pulse.
11 inchesBecause of its design, the BKO is limited in its rate of
Borefire. Without extensive modification, the BKO is
Not Specifiedmechanically capped at 18 BPS.
Rate of fireRegulators
18 BPSThe BKO was with two regulators to control air
Retail Pricepressure. The main one, the High Pressure Regulator
$300+(HPR), is meant to be set at around 250-300 PSI.
The Indian Creek Designs BKO is part of the B2KThis regulator is used to provide air to the Low
(Bushmaster 2000) series. The main differencePressure Regulator (LPR) and for the air that propels
between it and the Bushmaster series of markers isthe paintball out of the barrel. The LPR was used to
rather than being fully pneumatic, the ram housing onprovide the solenoid with air that is then diverted to
the BKO consists of a spring return ram. The BKOthe ram. To preserve the solenoid and the rest of
was discontinued in 2004, it was made by Indianthe low pressure system, the LPR was designed to
Creek Designs, located in Idaho. They also produceshut down if it encounters an input greater than 400
popular paintball markers such as the ProMaster,PSI. This regulator was usually set by increasing it
Freestyle and Bushmaster.until a leak was heard from the back of the marker,
Specificationswhich was the solenoid bleeding off the air at around
The 2004 BKO was an electronic solenoid actuated120 PSI, and then turning it 1/4 turn out. Either the
computer controlled paintball marker. The majorHPR or the LPR was used to adjust velocity.
components of the BKO were machined from solid,Parts diagram
aircraft-grade aluminum, and then hard anodized . TheStock Ram
BKO is reputed to stand for BushmasterStock 2002 LPR
Knock-Off,because it uses a different theory ofBko timeline and versions
operation. All internal parts, wear and contactThis time line was made by Darryl Hadfield
surfaces were heat treated or hard anodized. The(ICD-owners). This is a time line with a detailed
BKO used a single standard 9-volt battery fordescriptions of the various bko generation with
operation. The circuitry consisted of a microprocessorspecifics to the marker.
based digital controller. The BKO did not require tools2002
to field-strip. Removing the field-strip link-pin of the2002 bko
bolt enabled the removal of the entire bolt assembly.The first BKO was produced in the second half of
The BKO offers low-pressure operation. The main2002. ICD has not released a formal statement about
operating pressure is 200-300 PSI which is set byit, but it is widely rumored that the BKO actually
watching the gauge on the primary (input) regulatorstood for, ushmaster Knock-Off, as the marker was
while making adjustments. The secondary pressure isintended to capture the lower-end of the
factory preset and regulated to 85-95 PSI. Gas usageelectro-pneumatic market, as well as compete against
is controlled through these 2 internal regulators. Thethe massive market of seartripper markers...(and so
BKO included a removable 11" step-bore and portedon) To get More information , you can visit some
barrel. The stock BKO did not come with PDS (eyes)products about SD Reader USB, touh screen monitor,
but they were available for install by ICD directly or. The Flex RGB Color Light Bar products should be
other companies such as Vaporworks.show more here!
Propellants