| Minimotos are fast becoming very popular
| |
| | and turn evenly in a clockwise direction
|
| for leisure riding and also for
| |
| | to prise off the flywheel.Method 2 - Use
|
| competitive racing use. There has been a
| |
| | a purpose made flywheel puller.4) On
|
| marked move towards improving the
| |
| | removal of the flywheel, the stock key
|
| performance and power characteristics of
| |
| | can now be observed resting in its
|
| these miniature racing machines. One such
| |
| | machined slot in the crankshaft end.
|
| easy way to enhance the performance of
| |
| | Using a small pick simply prise the stock
|
| your minimoto is to fit a rocket key. The
| |
| | key from its slot.5) Install the new
|
| minimoto rocket key is designed with a 10
| |
| | minimoto rocket key in the vacated slot.
|
| degree offset and is a direct replacement
| |
| | Note that the 10 degree offset of the new
|
| for the standard straight cut item. Here
| |
| | rocket key should point to the right
|
| are the easy to follow instructions for
| |
| | (towards the front of the machine).6)
|
| rocket key fitment:Fitting a minimoto
| |
| | Once the rocket key has been fitted in
|
| rocket key1) Firstly remove the pull
| |
| | its slot, refit the flywheel and secure
|
| start unit from the right side of the
| |
| | with its retaining bolt. It is a good
|
| minimoto engine, which is held in place
| |
| | idea at this stage to use some thread
|
| by 3 hexagonal head screws and 1 bolt
| |
| | locking compound on the retaining bolt.
|
| attachment to the cylinder head area.2)
| |
| | Refit the pull start unit and secure.Now
|
| On removing the pull start unit the
| |
| | experience and enjoy the power gains from
|
| flywheel will be exposed. The flywheel is
| |
| | your newly fitted minimoto rocket
|
| retained with a 8mm bolt in the centre.
| |
| | key.Minimotos4u is a family run business
|
| Remove the 8mm bolt with a socket and
| |
| | based in North Lincolnshire. With over 3
|
| wrench. In order to stop the flywheel
| |
| | years experience of supplying customers
|
| rotating whilst undoing the bolt wedge an
| |
| | with top quality certified minimotos from
|
| Allen key in between one of the flywheel
| |
| | the most reputable suppliers. We carry
|
| fins and lodge it against the footrest
| |
| | extensive stocks of minimoto spares,
|
| support bar.3) Once the retaing bolt has
| |
| | performance parts, minimoto decals and
|
| been removed, the flywheel can be
| |
| | much more. Specialising in race tuned
|
| extracted. There are 2 available methods
| |
| | minimotos in MotoGP livery, we also stock
|
| of extraction.Method 1 - There are two
| |
| | dirt bikes and can cater for all your
|
| threaded holes in the flywheel, screw 2
| |
| | minimoto needs.
|
| long M6 threaded bolts into these 2 holes
| |
| |
|
