Trouble Shooting Kinnaird Carbon Fibre Drone Reeds

This article addresses some of the most commonlytongue. You can also remove the tongue and clean
asked questions about Kinnaird Carbon Fibre Dronethe tongue and bed of the reed with warm soapy
Reeds.water.
1. Double Toning- The reed is not getting enough air3. Drones Shutting Off- Often the reeds are set up
pressure. The most likely reason is that the reed istoo easy or there is excess moisture. If the reeds
set up too strong. Move the bridle towards theare too easy, move the bridle away from the
vibrating end of the reed to make it easier. Anothervibrating end of the tongue to make them stronger.
issue may be air restriction to the stock. There mayIf the reed is fine when you start, but shuts down
be a build up of seasoning in the bottom of theafter playing for a while, it is likely a moisture issue.
stock or a drone valve or enhancer may be tooInsert a dollar bill or business card underneath the
restrictive. Remove the valve or enhancer to see if ittongue to absorb some of the moisture. You can
solves the problem. Check their instructions to adjustalso remove the nose cone and put a pipe cleaner up
them so that they take less pressure to open.the bore of the reed & in the end of the nose
Canister systems can also cause restrictions. Checkcone. Dry out the bores with a cotton brush.
that all hoses are not kinked or leaking and that theMoisture control systems are great solutions and
canister is not too close to the bag restricting airflow.come in a variety of styles.
2. Squealing- The reed tongue could be too short.4. Make sure that your reeds are installed correctly.
Lengthening the tongue should fix it. If not, thereMany issues are due to improper set up. Full set up
may be some debris underneath the tongue. Cleaninstructions for Kinnaird drone reeds and their
under the tongue by inserting a dollar bill or businessreplacement parts can be found on the FAQs portion
card under the tongue and dragging it out the side,of our website.
while applying gentle pressure to the top of the