| Windproof lighters are fantastic gadgets that ensure | | | | fuel canister into the fuel nozzle on the base of the |
| you can enjoy your preferred pastime no matter | | | | lighter. Please note that some manufacturers |
| what the weather might be doing. However, you will | | | | recommend shaking your fuel canister prior to |
| eventually have to refill that lighter, no matter how | | | | refueling your lighter while others do not. Read the |
| much or how little you use it. While you might think | | | | can's label carefully to determine what you should do. |
| you have a firm grasp on the refilling process, many | | | | When the canister is fully seated on the nozzle, press |
| smokers do not know whether the lighter can be lit | | | | it down. You will hear a hiss as the fuel begins |
| directly after being refilled. Understanding the | | | | moving from the can to the lighter. You will also |
| importance of this is vital. Here, you will find a handy | | | | notice the can grow quite cool in your hands, as will |
| guide to refilling that will answer your questions about | | | | the lighter. Keep the flow of fuel intact for about five |
| immediate use. | | | | seconds before disengaging the canister. This helps |
| First, you should not strike your lighter immediately | | | | to avoid overfilling the lighter. |
| after refilling it. This is because the lighter fluid is cold | | | | Once the lighter is full, remove the canister and allow |
| after being compressed by the propellant. Allowing | | | | the lighter's contents to warm to room temperature. |
| the fluid to come to room temperature before you | | | | Once this occurs, you can adjust the flame height to |
| light is a very good idea. In addition, this will allow any | | | | your desired setting and ignite the lighter. If the |
| spilled fluid (overspray) to evaporate, so that it does | | | | lighter does not light, then you will need to repeat |
| not catch fire and cause you injury. | | | | the refilling process. After each refill, you should |
| How does the process work? First, hold the lighter | | | | ensure that the lighter and its contents are able to |
| upside down, so that the filler nozzle is visible. Keep it | | | | reach room temperature before you attempt to light |
| well away from your eyes. Next, insert the tip of the | | | | the lighter again. |